|
|
● Products | ● Represented Companies | ● Contact Us |
Vacuum Equipment - Polycold Systems- Polycold Refrigerant Gas |
|
Rebuilt or Re-Manufactured Polycolds Polycold PFC 660HC,PFC 1100HC, PFC 550 HC and other Polycold Models- Polycold Spare Parts and Gas Charges- Used Polycolds- Rental Program
Polycold Spare
Parts Pricelist Cryocoil Fabrication Schoonover offers cryocoil manufacturing to your specifications or drawings.
Polycold Refrigerant
Charge Price Sheet
Polycold Gas Charges-BUY ONLINE PFC 1100HC Gas Charge PFC 1100ST Gas Charge PFC 1000ST Gas Charge PFC 670HC Gas Charge PFC 660ST Gas Charge PFC 550HC Gas Charge PFC 330/340ST Gas Charge P 100 Gas Charge PFC 1100LT Gas Charge Target Pricing for Rebuilt Polycolds (Call for Availability) PFC 550ST - $10,000 PFC 550HC - $12,000 PFC 660ST - $12,000 PFC 660HC - $14,000 PFC 1100ST - $16,000 PFC 1100HC - $18,000 Polycold Specification Information Schoonover represents and distributes rebuilt or re-manufactured Polycold water vapor cryopumps. Our engineers have 78 years experience servicing and building Polycolds. Using this experience we can provide Polycolds that work as good as new at less than half the new Polycold price.
All Systems are provided with a 6 month warranty.
Should you just need spare parts including Polycold Gas Charges, contact
us at 770-479-7138. Used Polycolds Needed!! Please contact us to sell your Polycold. PFC 1100, PFC 660 and PFC 550 are especially needed. Spare Parts Available Refrigerant Lines Refrigerant Charges Top Off Charges XUJ Top Solenoid Valves Buffer Valves Defrost Valves Filter Dryer Replacements Couplings Acid Test Kit for Compressor Oil And Other Polycold Parts Service and Repair Schoonover can provide on-site repair at your facility or you can send your Polycold to their facility in Petaluma,CA. We have all factory trained Service Engineers for repair work. Service can be provided on an emergency basis to maximize uptime on you vacuum coating system, vacuum furnace or other vacuum system. A Service Engineer can respond within 24 hours. In addition, Schoonover can provide installation service for all Polycold models. POLYCOLD low temperature refrigeration systems allow you to increase productivity and product in your vacuum coating systems. To achieve high vacuum large amounts of water vapor must be pumped. Typical high vacuum pumps used in coating systems provide poor water vapor pumping. A "cool solution" is needed in the form of a water vapor cryopump such as a Polycold. Installation of a Polycold on a diffusion or turbo pumped vacuum system can reduce pumpdown by 50% or more. Polycolds are used in many types of vacuum coating processes such as vacuum metalizing, Chemical Vapor Deposition (CVD), Vacuum Sputtering, E-Beam Evaporation, Vacuum Furnaces, and magnetron sputtering. |
| PFC Fast Cycle Water Vapor Cryopump Our PFC Fast Cycle Water Vapor Cryopump can dramatically reduce pumpdown time and increase product throughput by pumping water vapor quickly and effectively. |
| P Cryocooler The P Cryocooler captures water vapor and also prevents back streaming of vacuum-pump fluids. Commonly used on Vacuum Furnaces where diffusion pumps are used as the high vacuum pump. |
| Get the Society of Vacuum Coating Glossary of Vacuum Coating Terms |
|
vacuum coating, sputte
olycold is a Water Vapor Cryopump Cold Trap for Vacuum, vacuum metalizing, and vacuum coating. Also known as as a Meisner ring, vacuum sputtering, decorative coating, in-line vacuum coating, ion beam deposition, thin film deposition, laser ablation, junk coating, metallization coating, Molecular Beam Epitaxy, planar magnetron, physical vapor deposition. Polycold is for high vacuum pumping of water vapor in vacuum coating and vacuum metallizing applications. |
| Call us at 770-479-7138 to request a quotation or more technical information. |
