|
Users need to both power and provide the control signal(0-5V,0-10V,
4-20 milliamp or RS 232)
to the device. The Apex Mass Flow
Controllers and Meters can also be controlled by the on-board
display buttons and do not need an input signal or cable.
Many users have a 24V power supply in which they want
to provide power. In that
case, then the DC-61 or the DC-251 should be the choice. For the end
user using FlowVision Software, the MD8DB9 cable is best. This cable
has the RS-232 connector to connect to the users
computer. A Power Supply cable would be needed with the MD8DB9.
Power Cable
PVPS24U: This
is a unregulated 24 Vdc, 120VAC, selectable plug style wall adaptor. It
can be used with any Apex style flow meter, flow controller, pressure
controller or pressure gauge.
Communications Cables
DC-61: The
8-pin circular mini-din connector cable is 6. long and has 1 male
mating connector. The opposite end is blunt cut with color-coded
wires.
DC-6RT: This
is a right angle, 8-pin circular mini-din connector cable at 6. long
with 1 male mating connector. The opposite end is blunt cut with
color-coded wires. This cable is typically used when overall device
height is critical.
DC-251: This
8-pin circular mini-din connector cable is 25. long and has 1 male
mating connector. The opposite end is blunt cut with color-coded
wires.
DC-62: The
8-pin circular mini-din connector cable is also 6. in length, but is
provided with a male mating connector on both ends. It is a straight
pin-to-pin cable. This cable is typically used with the LSPM or the
BB9 accessories.
MD8DB9: This
is a male 8-pin circular din to female DB9 adaptor cable. It is 6’
feet in length and is typically used to simplify connection direct
to a PC.
 IC-10: This
is a 6-pin industrial style locking cable that is 10" in length and
has 1 male mating connector. The opposite end is blunt cut with
color-coded wires. This cable reduces available analog output
signals to one parameter. This option is useful for industrial
installations in which the cable must be securely connected to the
device.
 DB-15: The
15pin Dsub connector is a common connection for process control
devices. The Dsub connector is installed in place of the standard 8
pin mini din that is normally used with the Alicat device. A single
15 pin Dsub cable is included with this option.
|
